Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Chains

$23.95
SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.
$25.00
The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.
$145.00
Due to its unique optimization treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimized by hand in Denmark. This ultrafast chain has been optimized for KMC 11-speed compatibility, to boost the efficiency of your entire drivetrain. CeramicSpeed UFO Racing Chains can save you between 2–5 watts on a distance of 600 km/370 miles. Apply CeramicSpeed UFO Drip after 600km to maintain your peak chain optimization over the life of the chain. Be aware that the UFO treatment is not optimized for wet and muddy conditions, which might cause corrosion on the chain. CeramicSpeed uses chains from high-end brands to which an optimization treatment is applied. The CeramicSpeed UFO Chains go through a multi-step process, which involves polishing, cleaning, and application of two layers of treatment to achieve the most efficient chain possible. The UltraFast Optimization process is not highly technical, but it is very time consuming. In The Box: - 116 link Optimized Chain - Quick Link - Single Use UFO Drip sample - Disposable Gloves - Sticker Sheet
$64.00
It might look normal from the outside, but the engineering inside this incredible chain design is anything but normal, and it makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle drivetrain’s ultra-smooth, precise, durable and quiet performance. The Eagle chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. HARD CHROME technology extends the chain’s optimal performance life.
$45.00
The KMC e101 chain is designed for single speed bikes such as BMX, fixed gear, or track, and is rated for use with an eBike motor. - The KMC e101 chain is designed for single speed bikes such as BMX, fixed gear, or track, and is rated for use with an eBike motor. - Triple X Durability technology means that this chain features KMC's highest durability rating - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads
$28.00
The basis of every Eagle drivetrain is its chain—and the NX Eagle chain is designed and manufactured using genuine SRAM Eagle architecture, so it is fully compatible with every other component in the Eagle ecosystem. The NX Eagle chain features solid pin construction, Eagle PowerLock, and smooth, efficient shifting that you can count on every time out. Features/Specs - Eagle PowerLock chain connector with FLOW LINK technology provides better chain-guiding and increased longevity - Unique features and design also provide significantly improved wear resistance on Eagle cassettes and rings - Weight: 278g (126 links) - Material: steel - Speeds: 12 - Compatibility: All levels of Eagle drivetrain systems
$24.99
Shimano CN-HG71 6/7/8-Speed Chains - 8-speed MTB chain meets durability requirements for e-bike use - Designed for precise Hyperdrive SIS and Dual SIS Index shifting - Includes chain and chain connection pin, or quick link - Links: 116
$38.99
CN-E6070-9 Chain (9-speed) FEATURE - New chain plate dimension BENEFIT - Reinforced against chain cut for E-BIKE use - More efficient and silent, less maintenance by SHIMANO “SIL-TEC”(CN-E6090-10) - Front single gear only
$19.00
SRAM's PC-870 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth and reliable, the PC-870 will take you where you want to go.
$29.95
SRAM’s PC-971 Chain delivers light weight, strength and smoothness to your drivetrain. Its nickel-plated sideplates provide faster and more accurate shifting plus excellent reliability. And, with its great PowerLink, you don’t even need tools to install it.
$55.00
- 1/2" x 11/128" - 136 Links - Built strong for your eBike - EPT anti-rust coating - 10-speed - Compatible with Shimano, SRAM & Campagnolo 10-Speed Systems - Mushroomed Pin Riveted
$70.00 - $75.00
-X11SL DLC: superlight chain for use with 11-speed Campagnolo/Shimano/Sram with Diamond Like Coating for extra durability, 235g -X11SL: superlight chain for use with 11-speed Campagnolo/Shimano/Sram (Gold color is Ti Nitride coating), 235g
$120.00
X-Superlight series chains are high-quality, high performing chains offering amazing shifting performance on any drivetrain you choose. For athletes looking for the lightest, strongest, smoothest shifting chain look no further. The main characteristic of the black Diamond Like Coating (DLC) is reduction of abrasive wear. Besides this, it’s surface hardness is higher than most coatings, this ensures a long-term function, optimal stability and higher durability. - Includes KMC Missing Link 11 - Compatible with all 11 speed systems (including Campagnolo/Shimano/SRAM) - Weight: 243g
$20.99
The Box Three BMX chain is polished and then chemically treated to achieve corrosion resistance. All Box Three chains have chamfered shifting edges, solid plates and solid pins to safeguard durability. Our unique inner link spacing is engineered to grab those modern wide/narrow chainrings. They are compatible with BMX 3/32" and 1/8" chainrings and cogs which fits most retro-modern 29 inch BMX bikes and smaller bikes.
$11.00 - $13.00
Z6 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.3 mm - Drivetrain Speeds: 6 , 7 - Chain Connection Type: Reusable Master Link
$26.99
Half-links allow for a more precise fit on the wide variety of gearing and chainstay length combinations out there. The Odyssey Bluebird Half-Link chain is built with proven chromoly link plates and hardened pins for greater durability. - Chromoly link plates - Hardened pins for greater durability - 1/2” x 1/8” size
$16.99 - $19.99
Odyssey Bluebird chain is the proven and reliable KMC 510-HX chain with an added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit. - Proven and reliable KMC 510-HX chain - Factory installed half-link for a radically stronger set-up
$65.00 - $70.00
Extra light 11-speed chains. - EL- Extra Light - Double X-Durability - For Shimano, Campagnolo and SRAM 11-speed derailleur systems - Titanium Nitride coated gold option for less friction, lower maintenance.
$25.00 - $32.00
The KMC K1SL SuperLite Kool Chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear, while offering substantial weight savings. - SL Chain sets a new standard with weight reduction, improved shifting performance & enhanced durability - The mud-shedding design is easy to clean - Chain features a heavy duty structure and is treated with a stretch proof treatment for maximum durability - Designed with KMC's Special Dynamic K Configuration which offers unsurpassable chain strength - Inner plate chamfering provides expeditious shifting - Features an anti-drop design - Links (links): 100 - Width: 9.5 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Single Use Master Link - Weight: 349 g
$80.00
The KMC e12 Chain is designed for use with 12-speed eBike systems. - Features KMC's highest pin power for unsurpassed riveting geometry - KMC's Triple X durability - Double "X" bridge shape allows for precise gear shifting - This chain is eBike compatible thanks to its high torsion resistance - Outer plate chamfering allows for accurate shifting - Inner plate chamfering allows for expeditious shifting
$30.00 - $35.00
The KMC HL1L Wide chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear. - Compatible with Shimano, SRAM, and Campagnolo drivetrains - Stretch-proof treatments provides exceptional durability - Hollow pin construction reduces chain weight - Links (links): 100 - Color: Black - Width: 9.5 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Bullet Pin - Half Link Chain: Yes
$18.00
Designed for use with T-Type chains, the Eagle Transmission PowerLock provides the same rugged dependability as its predecessors. - For use with T-Type chains - No tools required for installation
$25.00
The KMC X-Series has been designed with the specific characteristics of the Shimano, SRAM, and Campagnolo systems in mind and will meet the most demanding requirements. Elaborately designed and manufactured, the X-Bridge technology, thanks to precisely chamfered plates, allows a smooth propulsion and perfect gear changes in all driving situations. - Size: 1/2"x11/128" - Length: 116 Links - Weight: 273 grams
$16.00
- 1/8th inch chain for single speed use - Plate thickness and standard riveting - Pin width: 8.6mm - RustBuster coating (500292-05 only) increases resistance to rust; ideal for winter riding or salty environments - 399g (112L)
$59.00
SRAM’s 10-speed chain features hollow pins for light weight, strength and accurate shifting in all conditions. Plus, it's compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation and removal is a snap.
$20.00 - $33.00
- High Pin Power with Reinforced Durability - Quieter Riding Experience - Anti-Drop Design - Wider, Thicker, Safer
$12.00 - $16.00
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No
$45.95
Price point 11 Speed chain has a wider link design for increased shifting performance and reduced noise, and slotted links for reduced weight. - Designed specifically for use with Campagnolo 11 speed drivetrains only
$33.99
- E-Bike-compatible single-speed chain with Diamond Hard Coating which reduces wear and increases surface hardness - Deep inner waist chamfer ensures quiet operation - Sub-punched pins for increased tensile strength
$31.99
- E-Bike-compatible 7/8-speed chain with Diamond Hard Coating which reduces wear and increases surface hardness - 4-edged chamfered outer plates and inclined bridge provide improved shifting characteristics - Deep inner waist chamfer ensures quiet operations - Sub-punched pins for increased tensile strength
Page 1 of 5 Next page