Tools/Maintenance

- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life

World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MWR-SET includes 6mm to 17mm wrenches with a 12-point two-way ratcheting box end. Forged from chrome vanadium steel, chrome-plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful! - Includes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, and 17mm wrenches

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

Park Tool's Thru Axle Adaptors make it possible to adapt all Park Tool Truing Stands to work with 12mm, 15mm, 20mm, and 25mm thru axle front wheels, as well as Cannondale Lefty wheels (each sold separately). The TS-TA also work with the rear 135mm thru axle hubs in the TS-2.2 and TS-3. The TS-TA when used in the TS-8, TS-25, TS-15, TS-7 or TS-5 will work with all rear thru axle hubs. For thru axle hubs greater than 135 (142, 150, 157, etc.) in the TS-2.2, use the TS-2TA Thru Axle Adaptors (sold separately).

Remote rebuild kits and subcomponents for Reverb and Reverb Stealth Posts.

Handy and affordable, this tool makes it easy to get a clean cut every time. - Securely holds hose while cutting - Replaceable blade - Metal construction holds up to frequent use

Park's Open Ended Metric Wrench is a special thin wrench with 8 and 10mm openings perfect for adjusting the thin pivot-bolt nuts on sidepull brakes (and other hex nuts on your bicycle). This handy brake tool is made of durable tool steel that's nickel plated for corrosion resistance.

Park Tool's Shop Scissors are shop quality with sturdy, stainless steel blades and a dual-density grip. They're perfect for a wide range of mechanic's duties including cutting zip-ties, boxes, bar tape, and handle grips.

- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations

A sturdy bicycle cleaning brush with a unique angled and contoured shape – perfect for cleaning cassettes and freewheels as well as tires. With a strong ergonomic handle and stiff nylon bristles, the GSC-4 scrubs away the toughest muck and mess.

Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

Having trouble getting at internal spoke nipples? Park's Square Socket Internal Nipple Spoke Wrench comes to your rescue. The extra-long socket fits recessed nipples on most deep-section aero wheels. And, the ergonomic handle is comfortable even after you've built wheels for the entire team.

An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-2.2 is intuitive and easy to use, and applies up to 60 Nm of torque to any fastener or component with left or right-handed threads. Perfect for mid-to-high-torque applications such as bottom brackets, cassette lockrings, and crank bolts. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet, as well as most threaded bottom bracket tools. - 0 to 60 Newton meter (0 to 50 foot-pound) range - 3/8" drive - Reads and registers torque values for both left hand and right hand threading - Length: 17.75" (450 mm)

Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. The TAP-7 is 3mm x .5 for use with rear wheel drop-out alignment screws.

- Highly efficient carbon fiber assembly compound designed to prevent over-tightening and create a secure coupling between surfaces - Carbon Gripper creates friction between carbon fiber clamping areas and lowers clamping torque without causing fatigue or internal fractures or shortening component life

A daily-use, shop version of Park Tool's world-famous CM-5.2 Chain Scrubber. The CM-25 features a super-tough die-cast aluminum case and handle, plus a unique brush/sponge replacement cartridge that makes it easy to keep it running smoothly and working properly. Park Tool's proven four-sided scrubbing action makes thoroughly cleaning chains quick and easy. A shop quality cleaner built to give years of constant use. - Proven chain scrubbing technology leaves chains sparkling clean - Durable A380 aluminum die cast case and removable handle - Dual-sided sponges and wicking pads to help reduce drips - Rotating brushes clean on all four sides of every link - Brush and sponge cartridge quickly and easily clicks in and out (RBS-25) - Locking cover with stainless steel hinge pins - Choose drip or immersion fluid application methods - 100% serviceable

Park Truing Stand parts to get truing stands back into tip-top working condition. The TS-2TA.3 installs quickly and easily into Park Tool Professional Truing Stands — including the TS-2.2 & TS-2 — for full compatibility with thru axle hubs.

SRAM'S Jonnisnot Shifter Grease is a fluorocarbon lube perfect for steel-on-composite applications and for brake and shift cables. It minimizes friction and maximizes the performance of your components. You'll love the easy-to-use 20ml syringe container, too.

Zyklop Metal ratchet with switchover lever. Slim design for work in even very confined spaces. The 72 fine-pitched teeth allow a small return angle of 5 degrees. Comes with a switchover lever for convenient direction change and secure socket locking function. Forged, full metal ratchet (chrome-molybdenum steel) for particularly high robustness and long service life.

These premium needle nose pliers feature a compact 6" (150mm) length, forged and heat-treated steel construction, and ergonomic dual-density grips. The self-opening jaws provide a full-featured profile, ready for gripping, crimping, and cutting tasks. - Compact 6" (150mm) length and self-opening jaw - Forged and heat-treated steel constuction - Ergonomic dual-density grips

Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.

- Ultra durable, long distance chain lubricant - Excel in long distance wet or muddy conditions - It penetrates deep into the chain links core to provide long lasting lubrication and total protection - Extreme pressure additives coat every part of the link to provide silky smooth gear change and ultra efficient drivetrain

The small and handy RR-12.2 Tape Measure features a tough composite housing with an integrated belt clip and both metric and SAE readings up to 350 centimeters or 12 feet. Measurement can be locked in place using the thumb lock or the handy quick-stop button. - RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger - Maximum length: 350 cm | 12 ft. - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6") - The RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger - Metric and SAE readings up to 350 centimeters or 12 feet - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6")

- Pocket sized chain tool that mates perfectly with Topeak ratchets and torque tools - Compatible with single and multispeed chains up to 12 speed including Capagnolo chains - Includes a 4/5mm allen key and a chain hook as well as a rubber clip to hold

The chain tool is fundamental to bicycle mechanics. As drivetrains push the envelope, however, chain tools must evolve to keep pace. The Pedro's Tutto Chain Tool II has done just that. The Tutto II blends ergonomic, organic design and noticeable industrial stature with patented innovations like the Fit Dial and RPG and novel additions like the Peening Bit for Campagnolo® 11, 12, and 13-speed chain assembly, ergonomic set-back handle design, and Guide Pin Shear Slot. These unique features and a new replaceable bridge make the Tutto II the most versatile chain tool available, compatible with almost any chain from single speed to 13-speed and beyond including SRAM® Flattop chains. Lastly, the Tutto II was designed with season after season of professional service in mind featuring heat-treated tool steel construction for superior strength and lasting performance, and simple disassembly to make servicing and part replacement easy. Backed by Pedro's lifetime warranty. Key Features: Fit Dial: The Fit Dial is used to adapt your Tutto Chain Tool to almost any modern chain. The Fit Dial wheel has 4 anvil features. Inspecting closely you will find that each anvil feature differs from the other in height or style. Each anvil is marked with a series of dots denoting which setting is in use. A Fit Dial usage guide is laser etched on the Tutto handle for easy reference. Each indexed setting is easily selected by rotating the Fit Dial. RPG: The RPG, or Retracting Pin Guide, is a multi-purpose feature found only on Tutto Chain Tools and Pro Chain Tools. First, the spring loaded RPG supports the pin up to the face of the chain eliminating broken pins and ensuring perfect alignment every time. Second, for chains with guide pins like Shimano® or Campagnolo®, the RPG encloses the guide pin to prevent loss, bending or breakage, and ensures perfect installation. Third, the RPG accepts the Peening Bit required for installation of Campagnolo® 11, 12, and 13-speed chains. Peening Bit: The Peening Bit is handily stored in the base of the Tutto handle. This bit is used for Campagnolo® 11, 12. and 13-speed chain installation which requires a peening operation during installation of the chain rivet. The bit is easily removed from the handle and fits onto the end of the RPG allowing installation of Campagnolo® 11, 12, and 13-speed chains. Guide Pin Shear Slot: For chains that use a guide pin for installation, the Guide Pin Shear Slot provides an integrated tool to remove the guide section from installation pins. After pressing the master pin into the chain, simply insert the guide section into the shear slot and rotate the tool up or down. - Premium shop quality chain tool with patented Fit Dial and RPG for superior functionality and reliability. - Replaceable bridge ensures compatibility with all current and future chains from single to 13-speed and beyond including SRAM® Flattop chains. Visit pedros.com/chainfit for compatibility info. - Includes a premium EVA foam insert for storage.

The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

- Fits all 16-notch x 44mm external bearing bottom bracket cups and updated design also fits 16-notch x 44mm disc brake lockrings and Shimano TL-FC24 and TL-FC25 adapters. - Updated design features a square 3/8" drive. Also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise. - Professional quality, precision sized for the perfect fit. Pedro's socket tools provide the professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly protecting the component and ensuring simple and safe usage for the mechanic. The new External Bottom Bracket Socket, 16x44 is designed to work seamlessly with Pedro's snap-channel Pro Socket handle, with any 24mm socket/wrench, with any square 3/8" drive, or in a bench vise. Fits 16-notch x 44mm external bearing bottom bracket cups including Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded cups. Also fits many external Threaded types for Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, and others. The new design will now also fits disc brake rotor lockrings with 16 external notches and Shimano TL-FC24 and TL-FC25 adapters. Backed by Pedro's lifetime warranty.

Bicycle maintenance is often delicate, precision work. Having an ergonomic allen wrench set or torx bit set in the palm of your hand is an ideal resource for any mechanic. With these tools alone, installing bike accessories or making component adjustments is quick and simple. Available individually, or find them in our Team Edition and Ride Prep Tool Kits. - 2 / 2.5 / 3mm Allen wrench set - Ergonomic, overmolded rubber grip for comfort and precision - Durable polymer core creates a flex-free platform for confidently turning tight bolts - Hardened CRV tool steel maintains precise contact edges - Suitable for low and high torque adjustments on bicycle-specific components - Limited Lifetime Warranty

Finish Line® Super Bike Wash™ is ready to use and requires no water rinsing. It quickly cleans dirt, dust, clay, grime, chain soils, nutritional residues, and winter storage grunge off all surfaces of your bike. Super Bike Wash™ uses state of the art, eco-friendly cleaning agents that work together to create a high speed cleaning system. It requires little to no scrubbing. Super Bike Wash™ is non-toxic and meets the highest readily biodegradable standards. It can be safely used indoors or outdoors. Super Bike Wash™ can be used two ways: spray on and wipe off, or spray on and hose off. It is strong enough to remove surface grime from the drivetrain, and safe enough to remove grime build up on frames, saddles, brakes, and handlebar tape. It is safe for use on carbon fiber, titanium, aluminum, steel, and clear coat. • Ready to use with no water rinsing required • Safe for use on all surfaces and paint finishes • 100% readily biodegradable and non-toxic • State of the art cleaning agents remove dirt and grime • Superior rust inhibitors protect metal parts after application • Also available as a concentrate

Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6704 - 6804 - 6904