Car Racks

12 x 100mm fork adapter for use with 9mm fork-mount bike racks. - 12mm x 100mm - Axle not included. Works with your bike's thru-axle - Built-in safety tabs - Durable black powder-coat finish - All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.41 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any 9mm fork-style bike mount. - 15mm x 110mm - Axle is not included. Works with your bike's thru-axle - Built in safety tabs - Durable black powder-coat finish - All Yakima thru-axle Fork Adapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.40 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

- Fits all Yakima crossbars except 86-inch - Sold in sets of 4

- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in

This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty

The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.

Built for convenience and quick loading, the ideal hitch rack for up to 4 bikes of all shapes and sizes. Perfect for fat bikes, bikes with fenders and women's-specific bikes. Converts to a two-bike rack in minutes. - Transport up to four bikes regardless of frame design, suspension, or wheel size - Ideal for fat bikes, kids' bikes and fenders (FatStraps—sold separately—are necessary for carrying fat bikes) - Low tray height for quick and easy loading and unloading of bikes - Converts from a 4 bike rack to a 2 bike rack in minutes - Folds down with bikes loaded for rear-of-vehicle access - Folds up when not in use - SKS Hitch lock included - Fits 2" hitch receiver only - Accommodates bike wheelbases up to 48" - Maximum bike weight 45lbs/20.5 kg ( Total maximum load 180lbs/82 kg) Product Specs: - Weight: 66.00 lbs. - Dimensions: L 50.00 in x W 47.00 in x H 18.00 in - Limited Lifetime Warranty

Friends will double-take when they see our most versatile, aerodynamic bike mount on your car. It carries your complete bike—no wheel removal needed. The universal mounting system fits nearly any crossbars you can think of. - Fits Yakima round, square, factory or aerodynamic crossbars - Zero contact with frame; carbon fiber and custom paint jobs are protected - Accommodates disc brakes, thru axles, and full suspension bikes - Holds bike upright while you secure the bike to the mount - Leave your front wheel on for easy loading (some fenders may need to be removed to transport bike) - No tools or assembly required - Fits 20" to 27.5" wheels with tire widths up to 3" and 29" wheels with tires widths up to 2.7" - SKS Locks sold separately - 1 bike, up to 40 lbs at min of 18" crossbar spread; or up to 30 lbs at min of 16" crossbar spread - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 13.00 lbs. - Dimensions: L 56.00 in x W 7.00 in x H 7.50 in - Minimum Crossbar Spread 16.00in - Maximum Crossbar Spread 42.00in - Limited Lifetime Warranty

A fresher take on the classic strap rack, the Yakima FullBack 2 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 2 TECHNICAL SPECS - Weight: 22.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”

A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”

Now the family bikes can ride in style. The FullSwing has all the bells and whistles, from new ZipStrips to fully padded arms. It also swings away with one touch, for easy access to your car whenever you need. Holds up to four bikes. - Swings away from car with bikes loaded to provide easy access to rear of vehicle - Quick and easy assembly - Tool-free installation with locking SpeedKnob - AutoPin automatically positions and secures rack to the hitch and receiver - Zero-hassle ZipStrips quickly secure bike to rack - Fully padded arms for the ultimate in bike protection - Arms fold down when not in use - SKS Locks included; locks racks and bikes - Carries up to 4 bikes - 4 bikes. Total weight, 150 lbs. Maximum bike weight 40 lbs each. - Available: TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. Product Specs: - Weight: 56.00 lbs. - Dimensions: L 43.50 in x W 26.00 in x H 17.50 in - Limited Lifetime Warranty

The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck's tailgate while the soft felt backing protects your truck's paint. Integrated SitTight bike cradles and G-hook buckles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - G-Hook tension lock system is easy on carbon bike frames and painted surfaces - Medium: Transports up to 5 bikes; Large: Transports up to 6 bikes - Rugged, vinyl coated nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your trucks paint job - Add your own bike lock to the built-in cable lock loop to secure GateKeeper and your bikes to your truck - Reinforced webbing ends for easy installation under the tailgate - Integrated strap management system keeps the pad tight and secure on the way to the trailhead - HindSight tuck-away cover opens up the view for your back-up camera - Medium: Fits mid-size and some older full-size trucks with tailgates from 53-61" wide; Large: Fits modern, full-size trucks with tailgates 62" or wider - Printed graphics and silver reflective Yakima logo PRODUCT SPECS - Size Medium: Weight: 6.43 lbs; Dimensions: L 53.00 in x W 5.00 in x H 17.00 in - Size Large: Weight: 8.15 lbs; Dimensions: L 62.00 in x W 7.00 in x H 20.00 in

The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight bike cradles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - Tailgate pad for your truck that securely carries your bikes to the trailhead - NEW Cushioned SitTight cradles protect bikes from shifting and sliding - NEW HindSight cover tucks out of the way so your back-up camera can do its job - NEW Velcro cradle closure system is easy on carbon bike frames and painted surfaces - Rugged nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your truck’s paint job - Integrated strap management system keeps the pad tight and secure on the way up the mountain - Medium size has a 5 bike capacity and fits mid-size & some older full-size trucks - Large size has a 6 bike capacity and fits most full-size trucks - Medium Dimensions: 53-inch Long x 5-inch Wide x 17-inch Tall - Large Dimensions: 62-inch Long x 7-inch Wide x 20-inch Tall

Super simple and built to last, the new Yakima HangOut 2 offers grab-and-go bike carrying convenience for almost any vehicle. The adjustable strap system and QuickTrigger hub make installation easy, and the padded feet and coated metal buckles protect your vehicle’s paint. Integrated StableCradles secure your bikes for a confident carry and make loading and unloading a piece of cake. When you aren’t off adventuring, the HangOut folds flat for compact storage. - QuickTrigger hub system makes install easy and fast - Integrated StableCradles hold bikes firmly in place - Padded feet and coated metal buckles protect your vehicle - Arms fold for compact storage - Number of Bikes: 2 TECHNICAL SPECS - Weight: 16.00 lbs - Dimensions: L 27.50” x W 21.50” x H 11.25”

Super simple and built to last, the new HangOut 3offers grab-and-go bike carrying convenience for almost any vehicle. The adjustable strap system and QuickTrigger hub make installation easy, and the padded feet and coated metal buckles protect your vehicle’s paint. Integrated StableCradles secure your bikes for a confident carry and make loading and unloading a piece of cake. When you aren’t off adventuring, the HangOut folds flat for compact storage. - QuickTrigger hub system makes install easy and fast - Integrated StableCradles hold bikes firmly in place - Padded feet and coated metal buckles protect your vehicle - Available in two or three bike carrying capacities - Arms fold for compact storage - Number of Bikes: 3 TECHNICAL SPECS - Weight: 16.00 lbs - Dimensions: L 27.50” x W 21.50” x H 11.25”

All your bikes, all at once. The HangTight is designed for versatility, built to handle adventures of all sorts, and won’t blink at anything from kids to fat bikes to road to mountain bikes and everything in between. With fully padded cradles that support each bike by the handlebars, it serves up a shuttle-ready blend of stability and ease of use. The HangTight will get your bikes to the ride and back home safely no matter if your crew is a mix of all-mountain shredders or simply a family headed out for two-wheeled exploration. PRODUCT DETAILS - Transports up to 4 flat bar Bikes or 3 drop bar bikes using minimal space - Securely supports most road, mountain, kids, and cruiser bikes by the handlebar - Fully padded cradles protect your handlebars, including carbon bars - Rotating rear wheel cup fits a wide range of wheelbases up to 50" - Accommodates bikes up to 37.5 lbs. each - Holds 20"-29" tires up to 5" wide - Add your own bike lock to the integrated lock loop for greater bike security - Foot-operated tilt mechanism makes it easy to access the rear of the vehicle. - Dual cradle retention stabilizes and protects bikes from one another. - HitchLock included - Built-in bottle opener—cheers! - Fits 2" hitch receivers only - Compatible with the Yakima BackSwing and StraightShot (HangTight 4 only) - Not compatible with aero handlebars, clip-on aero bars, or handlebars larger than 35mm in diameter - Transport dual-crown fork bikes with the HangTight DH Cradle accessories (sold Seperatly) PRODUCT SPECS - Weight: 73.00 lbs.

All your bikes, all at once. The HangTight is designed for versatility, built to handle adventures of all sorts, and won’t blink at anything from kids to fat bikes to road to mountain bikes and everything in between. With fully padded cradles that support each bike by the handlebars, it serves up a shuttle-ready blend of stability and ease of use. The HangTight will get your bikes to the ride and back home safely no matter if your crew is a mix of all-mountain shredders or simply a family headed out for two-wheeled exploration.

There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.

Now you can haul 2 bikes of any size, from stout BMX bikes to long cruisers and heavy DH bikes with no need for adapters thanks to Yakima's HoldUp Hitch Rack. This sturdy rack sports heavy cast wheel trays and their adjustable StrongArm retainers that hold the bikes by the wheels for superior stability and super-quick loading. Side-to-side adjustability ensures a perfect fit and minimizes bike-to-bike interference. A user-friendly trigger folds the tray down for easy access and the entire mast folds up when not in use. Plus, the HoldUp also includes Yakima's LockDown cable system, which secures your bicycles and rack to your vehicle. There's even an integrated bottle opener.

This handy add-on doubles your HoldUp bike hitch carrier's capacity from 2 to 4 bikes—perfect for quadruplets on a family outing. Holds up to two bikes. - Expands your bike-hauling capacity from 2 to 4 bikes - StrongArm design secures bike at wheels, protecting paint and carbon frames - Fits 20" – 27.5" wheel sizes with tires up to 3.0" wide and 29" tires up to 2.5" wide - Accommodates bike wheelbases up to 48" - Accommodates disc brakes, through axles, and full suspension bikes - Tilts down with bikes loaded for rear-of-vehicle access - Side-to-side adjustability to adjust space between bikes - Carries 2 bikes (2" receiver only) - 4 bikes, 200 lbs total, with the HoldUp Product Specs: - Weight: 49.00 lbs. - Dimensions: L 56.50 in x W 64.00 in x H 12.00 in - Limited Lifetime Warranty

Simple, sturdy, and reliable – the JayHook is a fresh take on a Yakima classic. Designed to carry all types of kayaks, these side-loading J cradles are tough enough for years of use, secure enough for winding river roads, and padded enough to coddle your kayak. The tool-free universal attachment works with most roof racks. Bow/Stern Tie downs and Heavy Duty Straps are included, so you get everything you need to carry your boat. - Carries any type of kayak while taking minimal space on your roof rack - J-shaped cradle is secure, stable, and easy to load - Durable padded contact points provide protection and grip while traveling - Universal mounting hardware fits most roof racks - Easy tool-free installation lets you quickly mount, load and go - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs

The LoadWarrior is the perfect accessory to boost the carrying capacity of your Yakima roof rack, plus it fits many other racks, too. Ingeniously, bike mounts attach directly to the basket to make carrying bikes easy, too. This cargo carrier is big enough to handle all your gear. The LoadWarrior even comes with a custom fairing that cuts wind drag and noise.

Use Yakima's LoadWarrior Stretch Net to secure and control loads on the LoadWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.

Yakima's Locking Brackets replace two of the regular mounting brackets that come with your MegaWarrior and LoadWarrior luggage carriers so that you can safely secure these baskets to your crossbars. You get two Locking Brackets, Lock Cores and keys.

Say goodbye to awkward loading options, and hello to your e-bike’s new best friend. The OnRamp blends simple, efficient design with secure performance, to create a no-compromise rack to ease the challenge of carrying heavier bikes. An integrated ramp lets you roll your ride right into place, adjustable trays reduces bike to bike interference, and conforming frame clamps means it can carry a wide range of bike styles—from e-bikes to town bikes to mountain bikes and fendered-up road bikes—with ease. With a capacity of up to two 66-pound bikes, you can leave your battery on the bike and hit the road. Product Details - Engineered to carry 2 bikes up to 66-lbs each - Integrated ramp for easy, roll-on loading, and stows away neatly - Adjustable frame attachments means you can carry E-Bikes, mountain, road, hybrid, women’s specific, BMX, kids bikes and bikes with fenders with ease. - Accommodates tires up to 3.25” wide and up to 27.5x 4.5” wide tires with the FatStrap Kit (sold separately) - Accommodates bike wheelbases up to 50” - Integrated SKS (Same Key System) locks included to secure bikes to rack and rack to vehicle receiver - Tilts forward with bikes loaded for trunk access - Adjustable bike trays minimize bike-to-bike interference - Off-Road Rated at 40lbs per bike - RV Rated at 40lbs per bike Product Specs - Weight: 42.60 lbs. - Dimensions: L 34.00 in x W 52.00 in x H 45.00 in - Limited Lifetime Warranty

The versatile, no-drill Outdoorsman lets you create a top-of-vehicle truck rack system for your full-size pickup truck—without the need for a camper shell—while leaving you full access to the truck bed. - Clamps onto truck bed rails without any drilling - The perfect rack solution for everyday hauling of ladders and lumber - Heavy-duty construction handles up to 300 lbs - Sold in pairs; combine single pair with racks on truck roof or combine two pairs for complete system Product Specs: - Weight: 25.00 lbs. - Dimensions: L 16.00 in x W 2.00 in x H 29.00 in - Limited Lifetime Warranty

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.