Cables

- 4mm compressionless housing - Low friction polymer liner - Housing Length: 200m

Jagwire Elite Link housing is the ultimate combination of durability and attention-grabbing looks. Available in six eye-catching colors, they're designed to improve any bike's performance and appearance. The housing uses a series of aluminum links to provide a compressionless system for precise shifting performance. But unlike typical compressionless housing, its flexibility allows for tight bends without kinking. It's also lighter than traditional linear strand shift housing while being more durable. Combine these benefits with Elite, ultra-slick polished cables and Slick-Lube liners, and you've got the best of performance and style. - Precise, compressionless shifting performance combined with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - Ultra-slick polished inner cables minimize system friction - Durable aluminum housing won't kink or rust and is 20% lighter than typical shift housing - Includes enough housing and end caps to reach a rear derailleur or internally geared hub on a typical frame - Bikes with extra-large frames or unusual cable routing may need additional links and/or liners; service parts are available separately

Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.

Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. - Allow the easy installation of Jagwire hose with Shimano disc brakes - Kits contain enough hardware for both front and rear brakes - Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation Compatibility - HFA312: Shimano XTR M975, Deore XT M775, SLX M665, LX T665 and M585, Hone M601, Deore T615, M595, M535 and M525, Alfine S500 and S501, Metrea U5000, Alivio M4050, Acera M3050, and Non-Series T605, MT500, M575, M486, M485, M446, M445, M395, M365, and M355 - HFA314: Shimano Dura Ace R9120, R9170, R9180 and Ultegra R8020, R8070

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. The cable surface is highly polished to remove friction causing imperfections on the cable surface. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.1mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

- Complete cable kits for internal three-speed hubs

Road Pro Brake kits offer enhanced performance and style. Designed to work with and match Jagwire's Pro Shift kits, the Pro polished brake cables combined with their Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Road Pro Brake kits are easy to install. - Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance - All parts needed for a complete brake cable and housing install on road bikes are included - Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes

SRAM's Shift Cable Kit is the right kit to have on hand so you can fix a broken cable and a nice upgrade, too. It comes with 2 1.1mm-diameter SRAM shift cables and enough SRAM 4mm-diameter compression-free housing to fit any size bicycle. The housing has a slippery liner for super-smooth shifting. You also get SRAM aluminum ferrules and cable crimps to prevent fraying.

- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

- 1.2 mm x 2100 mm (1 pc.) - 1.2 mm x 1800 mm (1 pc.) - OPTISLICK - Stainless steel - Outer cap with short tongue for ST (2 pcs.) - SIS-SP40 outer caps (3 pcs.) - SIS-SP40 sealed outer caps (1 pc.) - Inner end caps (2 pcs.) - OT-SP41 1700 mm - OT-RS900 (1 pc.)

- BMX brake cable kits for front or rear application - 1.5mm galvanized inner slick cable - Cable length: 1700mm / 67-inches - Housing length: 1750mm / 69-inches

Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.

- Wet or muddy condition cable sealing solution - 4/6mm

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps

Slick compressionless brake cable/housing kits offer smooth, crisp, and reliable braking Kits include: - 5mm pre-lubed, Kevlar-lined, compressionless brake housing - 1.5mm stainless steel die-pulled and polished slick brake cables with SRAM/Shimano compatible heads for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protectors - Cable tips

Jagwire's flexible shift housing is used for the rear housing segment with Shimano Shadow-type road rear derailleurs to give optimum shifting performance and the flexibility needed for wheel installation and removal. - For use with Shimano Shadow type road rear derailleurs, such as RD-R9100, RD-R8000, and RD-R7000. - 4mm low-compression CGX-SL housing construction. - Includes 10x sealed end caps and 10x 4mm/4mm housing connectors

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the Road Elite Link Brake Kit

Jagwire Sport Shift XL cable kits are perfect for bikes that need extra-long cables and housing. - Sport Slick Stainless inner cables resist corrosion and are die-drawn to reduce surface friction - Compressionless LEX-SL housing uses Slick-Lube liners to protect the cables and ensure consistent performance - Sealed end caps help keep contaminants out of the housing - Anti-Kink End Caps prevent damage when bicycle is folded - The single-ended SRAM/Shimano compatible cables end are weld-cut for easy installation

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Tektro brakes and includes enough hardware for one bicycle.

SuperSlick compressionless gear cable/housing kits offer unrivaled shifting performance Kits include: - 4mm pre-lubed, Kevlar-lined, compressionless gear housing - 1.1mm stainless steel die-pulled and polished superslick gear cable(s) with electrolysis coating and SRAM/Shimano compatible head(s) for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protector(s) - Cable tip(s)

Our Box One Inner Shift Cable is the perfect upgrade for your Box Three or Box Four cable. It is also an ideal replacement for your Box One or Box Two cable set-up. When combined with our Box One housing it has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time. FEATURES - Our Best Performing Cable - Slick Coated - Inner Cable 2100mm - (2) 1.8mm Cable End Crimps COMPATIBILITY - Works with 11, 9, 7, 8, 12, and 10 speeds - Weight: 14.6 grams

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

- Stainless steel die-pulled and polished slick gear cable for smooth, fast, accurate, and reliable shifting - SRAM/Shimano compatible head for both MTB and Road applications - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.1mm