Cycling Shoes

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Approximate weight: 395.9 grams - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

Step into Wølfgar, the world’s most advanced winter cycling boot. We’ve combined decades of winter cycling experience with NASA-grade insulation materials for a boot that keeps feet warm and dry down to -25ºF. Wølfgar is a boot worthy of singletrack sessions or multi-day expeditions in the harshest winter weather. - Our lightweight three-piece proprietary bottom assembly is compatible with both flat pedals and 2-bolt cleats, and features a rubber outsole with microglass lugs for traction on ice - Waterproof materials and construction keep the elements out, while aerogel under the foot and over the toe block frigid air - On the inside, Wølfgar’s reflective thermal lining retains warmth, and a removable wool and faux-fur liner wicks moisture and insulates

Don't let cold, damp winter days slow down your riding. The adidas Five Ten Freerider EPS Mid Mountain Bike Shoes are a winter-ready, mid-height version of our classic Freerider shoes. The addition of PrimaLoft® insulation and an insulated, heat-reflective footbed keep feet warm. A coated, weather-resistant leather upper with minimal seams seals out water for dry feet. Their mid-height cuff adds weather-sealing coverage and warmth. A Stealth® S1 Dotty rubber outsole grips wet, slippery ground and your pedals for full control on and off the bike. - Weather-friendly PU Leather for durability and comfort in all conditions - PrimaLoft Gold insulation package to keep your feet warm - Heat-reflective footboard to retain body heat - Rubber cup sole for added durability - Mid-flex midsole balances pedal feel and power output - Stealth S1 Dotty outsole for unbeatable grip

Specifically designed for gravel rides and long hours of cycling on terrain full of surprises, the Sidi Gravel shoe offers comfort and stability on road and off. -The Tecno-3 Push System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -All new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -Polyurethane shock absorber with inner padding designed to protect your feet -The reinforced heel cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer -Provides additional foot protection in the event of a crash -The Sidi MTB Competition Sole has been specifically designed for gravel biking and can be fitted with two toe spikes on the front for traction in difficult and muddy conditions. Toe spikes are sold separately

45NRTH Wölvhammer BOA® winter bike boots make year-round riding possible, with high-tech design and materials that stand up to snow and ice. Get yours here. Most winter boots aren't made for riding bikes — they're too warm in some spots or not warm enough in others, and they're not optimized for pedaling. Wölvhammer BOA® boots are the answer for winter riders. Designed and built for the rigors of real winter riding (deep snow, slippery ice, cold pedals), These winter bike boots are rated for comfort from 0º to 25ºF (-18º to -4ºC), slotting between our Ragnarök and Wølfgar boots. Take on winter rides with Wölvhammer. - Rated for 0º to 25º F / -18º to -4º C comfort - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Hook-and-loop upper strap helps secure boot - Removable synthetic liner boot for quick drying - Waterproof breathable membrane to manage moisture - 200 g of Primaloft® insulation - Aerogel insulation underfoot blocks the chill from snow, ice, and cold pedals, and allows for insoles without sacrificing warmth - Non-slip sole for walking on icy surfaces - Compatible with flat and clipless pedals

The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Two-bolt cleat pattern fits all major mountain pedals. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

At a mere 150 grams, the S-Works EXOS are the lightest cycling shoes to ever come with a Boa® dial. And not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’re still at that World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer, we implemented all the engineering bells and whistles we could think of. And when that wasn’t enough, we thought up some more. The carbon outsole was developed using an advanced form of Finite Element Analysis and pressure mapping to pull out material where it wasn’t needed. This allowed us to keep crazy-high stiffness numbers, too. For the uppers, we completely removed the heel counter. And with a little help from the space-grade Dyneema® mesh and some CubicTec reinforcement, the heel molds to the back of your foot, so nary a watt is wasted. Lastly, we developed a new Warp Sleeve vamp that let us get rid of the toe box, and this further cut down the weight and increased the comfort. Of course we couldn't do any of the above without including our coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but to also increase efficiency and to reduce the risk of injury. The S-Works EXOS are the lightest cycling shoes to ever have a Boa® dial—experience the feeling of lightness. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 - A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection and comfort. - BOA IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, and speed. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 140g (1/2 pair, Size 42)

Originating from the conceptual standpoint of a mountaineering boot, the new and evolved Wölvhammer is lighter, more comfortable, and grippier. The overhauled design features a removable synthetic liner and a three-piece proprietary bottom assembly compatible with flat and clipless pedals. When the cold winter creeps in, Wölvhammer has you covered. - Removable synthetic liner boot for quick drying - 3-piece proprietary bottom assembly is lighter, warmer offers more walking traction - Aerogel insulation blocks cold cleats and allows use of preferred insoles without sacrificing warmth - 0 to 25F / -18 to -4C Comfort

The Garneau Klondike M3 Cycling Boot offers ultimate protection and keeps feet warm on long winter rides. - High volume fit last - Cordura 1680D with 400 g ThinsulateTM to resist cold temperatures down to -20°C/-4°F - Boa® IP1 with silicone elastic and neoprene opening with YKK zip - VIBRAM® DURATREK outsole - 3-layer construction insole with felt, 3 mm PE and foil

Are you looking for quality cycling shoes that won't cost a fortune? Let us introduce our brand-new Chrome XZ. It's easy to put on with the mesh tongue and has all our superior components in a simplified version. Our carbon Ergo Air Stream sole was made to boost your pedaling force, reduce energy loss, and prevent cramps. These shoes have been built with extreme precision. Try them on, you'll see how it feels to be a champion! Technical Details: - Technology: Integrated X-Comfort Zone technology with better stretch - New Ergo Air Stream co-injected for great stiffness - Easy slip on and breathable for great comfort - Weight: 8.6oz / 244g (size 42) - Insole: Breathable, ventilated - Closure System: 3 hook and loop fasteners for easy adjustments - Cleats: SPD and SPD-SL compatible with 2-3 bolt

The Stamp flat shoe does it all, whether on street or trail. The outsole is optimized for Crankbrothers Stamp pedal body, though it is designed to work flawlessly with any flat pedal. Its high-friction rubber compound provides optimal grip and its lug depth absorbs the pins to ensure a secure pedal connection. - Closure System: Classic lace closure system offers smooth closure with round laces and a pocket to safely tuck laces. - Match Compound: Our flat rubber compound (MC2) is optimized for grip and durability. It has high-friction to stick to the pedal body and low rebound properties to dampen vibrations. The lugs are rounded to resist abrasion. - Match Outsole: The tread pattern is designed for traction off the bike. Directionally angled and spaced toe and heel lugs offer traction for hiking up or down steep terrain. The ramped toe provides walkability on steep terrain. - Match System: The tread pattern is designed for maximum contact surface and compatibility with the pedal platform. In addition, the lug depth is designed around pin dimensions to absorb the pin body. Upper Features: - Closure system - Hidden eyelets - Lace pocket - Perforated toe - Mesh windows - Perforated tongue - Reinforced toe - Padded tongue - Heel dots

Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)

The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure.

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

Tuned grip, on and off the bike. Equal parts high-performance biking shoes and everyday sneaker, these mountain biking shoes are built with a soft suede leather upper for comfort and increased durability. The Dotty tread is coupled with an internal EVA midsole to provide a stiff and supportive platform for whatever action you find yourself facing. Optimal friction - Stealth Phantom rubber outsole. - Padded for comfort yet lightweight for all-day rides and walks around town - Stealth S1 rubber outsole for unbeatable grip - Suede leather upper for comfort and soft feel - One-piece molded rubber cupsole - Textile lining - Regular fit with lace closure - Weight per shoe: 310g (based on Women's Size 7)

If you’re looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Synthetic leather upper conforms to the foot and is built to last. - Cushioned EVA foam midsole for comfort - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 367g (1/2 pair, Size 42)

Flat Pedal Mountain Bike Shoes with an Impact-Resistant Toe Box The adidas Five Ten Freerider Pro Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage and a quick-drying synthetic upper. Cushioned and water-resistant, they offer comfort for full days on the bike. Stealth S1 rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider. - Lace closure - Fast-drying synthetic upper - OrthoLite sockliner - Molded EVA midsole - Impact-resistant urethane toe box - Stealth S1 Dotty rubber outsole - Imported

Transfer maximum power to the pedals on the trail. These all-weather mountain biking shoes have a clipless style that's compatible with all clipless mountain bike pedals. A carbon-infused nylon shank adds to the stiff build. The Stealth C4 rubber outsole provides exceptional grip on and off the bike. - Lace closure with hook-and-loop top strap - Synthetic weather-resistant micro-perforated upper - Perforated EVA tongue with mesh overlay - Stealth C4 rubber outsole for unbeatable grip - Durable lightweight EVA midsole - Clipless style - Stiff carbon-infused nylon shank - Regular fit - Textile lining

Designed to withstand the elements and provide comfort on rugged trails, the Trailcross GTX Flat Shoe blends a durable, hiking-inspired build with a high friction Stealth Phantom rubber outsole. - Bike and Hike outsole: designed for grip at the toe and heel while maintaining a pedal platform under foot - Weather-friendly GTX (Gore-Tex) mesh upper for breathability and comfort - Textile-free and closed cell sockliner - Lace tuck on the middle of the tongue - Neoprene cuff keeps debris out - Non-marking Phantom Dotty outsole for grip on and off the bike - Midsole flex points allow flex while hiking but keep stiffness while on the pedal

Pedal-gripping utility and elevated everyday style. Equal parts high-performance bike shoes and everyday trainers, the Five Ten Sleuth DLX Mountain Bike Shoes let you flow between rides, school, work or the coffee shop with all-around laid-back style. Genuine flat pedal control meets a do-it-all look with Stealth Phantom Rubber and a Dotty tread outsole. - Stealth Phantom offers unbeatable grip and non-marking utility - Dotty tread for optimal pedal control

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

The new S-Works 7 Lace takes the performance of the winningest road shoe in the world and combines it with laces to create one of our most supple and adaptable uppers for next-level fit. Paired with our Body Geometry technology for optimum foot, knee, and ankle alignment, going fast never looked so good. By utilizing laces, the shoe offers 12 separate points of tension adjustment to dial in the perfect hold across the entire foot, while the removal of plastic hardware allows the engineered mesh upper to adapt to more foot shapes for a sublime, supple fit. The S-Works 7 Lace fits like a leather glove, but you know, for your foot and made of engineered mesh and carbon. But laces have more to bring to the party. The removal of plastic hardware also shaves considerable weight. One size 44 S-Works 7 Lace weighs a feathery 236 grams, so you’ll be looking good and feeling good when the road points uphill. The foundation for all this is the technology pioneered for the S-Works 7. Our Powerline carbon outsole—our lightest and stiffest outsole ever—creates the ideal platform for power delivery. Our PadLock heel comfortably holds the rear of your foot, while the engineered mesh upper delivers a stable yet supple hold for all-day power delivery. Whether you’re looking for a relaxed coffee ride shoe, a lightweight climber, or a supple and adaptive fit that compliments your race shoe, the S-Works 7 Lace marries classic style to race-winning heritage and performance. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Non-stretch laces provide even hold across the entire foot that stays consistent all ride long. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0. - Engineered mesh is combined with no-stretch TPU zones for the ultimate connection and comfort. - PadLock™ heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximately 236g per shoe (size 44)

Just because winning an XC World Cup isn’t on your to-do list, doesn’t mean you don’t value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in the saddle performance. We’ve also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we’ve covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won’t get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and even more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)

Ride further, whatever the terrain, whatever the bike, whatever the destination. The Sidi Eagle 10 Mega is the best shoe for any day on the dirt, whatever your riding style. The Microtech upper, the first microfiber introduced in cycling shoes years ago by Sidi, is the most comfortable Sidi has ever offered, while the sole is designed to ensure the ideal combination of performance and comfort both on and off the bike. -The Sidi Mega Last provides Sidi fit and performance to riders who have slightly wider feet -The Sidi Mega Last is 4mm wider across the ball of the foot, has more volume, a higher instep and a wider heel cup -Mega lasts are sized EE to EEE -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep, ensuring an ideal fit -The Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The all new proprietary SIDI Wire monofilament is completely non-binding for intuitive and effortless on-the-fly adjustments -The integrated heel cup, with a new light weight design is reinforced to avoid deformation during the most grueling of rides -The reflective inserts on the heel improve safety on the road, helping to signal the presence of the cyclist in conditions of poor visibility -The shape of the tread has been specifically designed for mountain biking, allowing improved grip, superior mud dispersion and great stability -The toe inserts are easily replaceable and offer the ability to mount crampons for particularly muddy rides -The Sidi MTB SR17 sole represents an ideal balance of stiffness for efficient power transfer and flexibility and comfort for walking

Mountain bike shoes for aggressive, gravity-fueled riding. Downhill or enduro, these adidas Five Ten Hellcat Pro Mountain Bike Shoes offer all-conditions control for gravity-fueled riding. Cleat-compatible with a stiff midsole, they allow for aggressive pedaling. A synthetic upper with abrasion-resistant weldings provides extra durability. Non-marking Stealth Marathon rubber grips pedals and ground alike. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closure - Textile upper - Molded sockliner - Abrasion-resistant weldings - Clipless-compatible - Stealth Marathon rubber outsole - Imported

Flat-pedal mountain bike shoes for gravity and enduro riding. Choose your line and let it roll. The adidas Five Ten Impact Pro shoes set the standard for flat-pedal mountain bike control. Pedal-gripping tread and a wide, stiff platform support aggressive enduro and gravity riding. Go ahead and send it. PEDAL-GRIPPING CONTROL Stealth S1 rubber provides unmatched pedal grip. WIDE, STIFF PLATFORM Reinforced midsole provides a stiff platform for aggressive riding. IMPACT RESISTANT PORON reinforced toe box adds impact resistance. SPECIFICATIONS - Lace closure - Quick-dry synthetic upper with reinforced toe box - Stiff, supportive feel - Gravity-minded mountain biking shoes - Compression-molded PU midsole - Stealth S1 rubber outsole - Imported

Lightweight adventure biking shoes. Ride. Eat. Sleep. Repeat. Bikepacking is synonymous with adventure. The Five Ten Trailcross LT Mountain Bike Shoes scramble over rocky terrain and kick it at camp just as well as they grip pedals. Light, breathable, and comfortable enough for all-day wear, you've found the do-it-all adventure bike shoe for the road less traveled. SPECIFICATIONS - Regular fit - Lace closure - Breathable mesh upper - Lightweight, durable feel - Lightweight biking and hiking shoes - EVA midsole - Non-Marking Stealth Phantom Dotty rubber outsole - Imported

Bont Riot+ , the world's first carbon-composite, heat-moldable, entry-level cycling shoe now available with BOA retention system. The Riot+ combines Bont's pro series technical features, our power transfer platform, anatomical shaping with competition grade materials and BOA retention system to create the most technically advanced entry level road cycling shoe. - Model: Riot+ - Material: Carbon Composite Construction with Microfiber Upper - Stack Height: 4.8 mm - Air Vents: Ventilations holes through upper and mesh inserts - Innersole: Comfort - Sole Guards: Replaceable - Cleat Mounting: 3 Hole Look Configuration - Closing Options: Boa dial and Z from Velcro strap - Weight: 280 grams