Tools

This handy shop aid is ideal for sizing spokes, ball bearings, and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings it works just like a gauge for drill bits. • Has both metric and fractional spoke length markings • Anodized aluminum with embossed markings to allow easy reading and long life

Park Tool's CTP-4K includes four replacement chain tool pins and one 5/32" ball bearing. To replace the chain tool pin, unscrew the cap, and pull out the old pin. Use care not to lose the ball bearing beneath the pin. Install the new pin and replace the cap. Works with the CT-4.3, CT-4.2, CT-4, and CT-11

Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole set, featuring 13mm - 24mm, 26mm and 28mm wrenches to suit your repair needs.

The DTD-10 is a precision component Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-10 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminum handle and a precision T10 tip. - T10 Torx®-compatible wrench - Not intended for high-torque applications - Total length: 3.75" (95mm) - Shaft length: 1.7" (43mm) - Weight: 2.22 oz. (63g)

A great shop accessory made to hold a wide variety of axles, spindles and any Park Tool Freewheel Remover/Lockring Tool. Made from precision extruded aluminum.

The BK-UK includes six new and revised parts for the Park Tool BKD-1 and BKM-1 Hydraulic Brake Bleed Kits, allowing for compatibility with the latest brake models from popular manufacturers. Includes: - Part #2600A (x2) — M4 x 0.8 adaptor for use with SRAM DB8, Trick Stuff, and Campagnolo mineral oil brake systems - Part #2588.2 — Thin-walled hose compression sleeve for internal bleed nipples, such as those found on Shimano mineral oil brake systems - Part #2574A — Hose assembly with integrated fitting for bleed nipples such as those found on Shimano mineral oil brake systems - Part #2615-2 (x2) — 11 mm bleed blocks for use with Hayes DOT brake systems All parts also available individually. NOTE: The seals on each part are designed for one type of fluid — DOT fluid or mineral oil — and should be used only on the systems they were intended for. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure.

Shop quality, L-shaped, high-torque industrial steel hex wrenches with a ball end on the long arm and stubby short arms specifically for reaching bolt heads in tight spaces (like caliper mounting bolts, chainring bolts, etc.). Other features include chamfered tips, tight tolerances, and a handy portable tool organizer/holder. 1.5, 2, 2.5, 3, 4, 5, and 6mm hexes.

Park's AWS-8 Hex Wrench Set features Bondhus balldriver ends, which facilitate use when the tool is at an angle to the bolt. This is great for working in hard-to-reach areas, such as reaching water-bottle-cage screws. The AWS-8 has 4, 5, and 6mm wrenches, which are the most common bicycle bolt sizes. Plus, its Y shape and vinyl coating provide excellent leverage and comfort.

The MTB-5 packs 16 functions into one slim, tough folding multi-tool, making it the ideal companion for any trailside adjustment or emergency fix. Features a full set of hex wrenches and screwdrivers, a T25 Torx-compatible driver, and five specialty tools to aid in common on-the-ride repairs. Includes the following: - 2, 2.5, 3, 4, 5, 6 & 8 mm hex wrenches - T25 Torx-compatible driver - Philips #2 cross tip & flat head screwdrivers - Chain tool (5 to 12 speed compatible)* - Spoke wrenches (equivalent to SW-0 and SW-2) - Presta valve core removal tool - Disc brake rotor truing tool - Disc brake pad spreader *The MTB-5 will not peen Campagnolo 11, 12 or 13 speed chain rivets - Dimensions: 3.1" x 1.8" x 0.8" (79 x 45 x 20 mm) - Weight: 6.9 oz. (195 g) - Replaceable chain tool pin (Part #985-1)

Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.

Improperly aligned frame or fork dropouts can cause bent axles and quick-release skewers, as well as tracking and shifting problems. The Frame and Fork End Alignment Gauge Set quickly determines whether the frame or fork dropouts are aligned and parallel. If an error is detected, long handles and comfortable molded grips afford plenty of leverage for straightening. These Park gauges adjust to compensate for various hub widths from 100mm to 160mm, too.

Because even your reliable Mavic wheels will eventually need truing, Park offers their Spoke Wrench For Mavic Wheel Systems. This comfortable, vinyl-coated, double-ended spoke wrench easily accesses and turns Mavic nipples. One end fits Mavic 6-spline, 9mm threaded eyelets and the other fits their 7-spline, 6.4mm nipples.

The MTC-30 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 2.5, 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible drivers - Combo cross/straight tip screwdriver - 8 & 15mm box wrenches - Key ring holder - Weight: 131g (4.62 ounces)

A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes: • 1 GSC-1 Gear Clean Brush • 1 Tapered Detail Brush • 1 Frame Cleaning Sponge/Bristle Brush • 1 Soft Bristle Soaping Brush

Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the bottom bracket shell and into the bearing so the bearings can be tapped out of the frame with a hammer. The set also includes two bushings that you use in conjunction with a bearing press for precision bearing installation (bearing press sold separately).

The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each cup. The handle of the BBT-4 is vinyl coated for comfort. The major diameter of the tool is nominally 44mm, and the minor diameter 38mm. The BBT-4 is compatible with the following sealed cartridge bottom brackets: • Campagnolo Veloce • Xenon • Mirage • Daytona • Avanti

A great time-saver! Park Tool's Nipple Driver is neatly designed to self-center and drive conventional nipples quickly and easily during wheel building. The ND-1 is built with a comfortable, dual-density grip and lined with precision bronze bearings to ensure a long, smooth running life. It works with rims up to 50mm deep.

Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.

Park Tool's 750.2 Centering Cone Adaptor increases the size of the centering cone of the HTR-1 and HTR-1B Headtube Reaming and Facing Sets. The 750.2 will allow you to use the HTR-1(B) to ream and face head tubes designed to accept IS, ZS, and 1.5-inch EC headset standards. Before reaming or facing, make sure you have the correct cutting tool and pilot for the headset standard(s) you are using. Please refer to our product pages for cutters and pilots for this detailed compatibility information.

The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell.

The 1729-TA Sliding Thru Axle Adaptor is designed to allow any Park Tool PRS-20, PRS-21 or PRS-23 Repair Stand to accept 12mm and 15mm thru axle wheeled bikes.

The BBT-16 removes and installs the self-extracting/one-key release caps on SRAM and RaceFace cranks with a 16mm hex hole. Features investment cast steel construction and an option to use 8mm hex for better leverage.

Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand (each sold separately). Park Tool's Rotor Truing Gauge features an infinitely adjustable, finely threaded indicator gauge. It works with any diameter brake rotor.

The strong, lightweight IB-2 features ten essential tools in the compact form factor of our unique I-Beam handle. Perfect for on-the-ride adjustment of brakes, handlebars, saddles, or derailleurs. With its compact size, the IB-2 is a perfect tool for the saddlebag, jersey pocket, or toolbox.

Wall or pegboard mounted holder designed specifically for Park's P-Handle Hex Wrenches. Positions wrenches for easy access with easy-to-read size designation for each tool. Tools sold separately.

A great way to keep the benchtop organized during a repair, the OM-2 features an over-sized textured work area and raised trays for organizing small parts and hardware. Perfect for overhauling or rebuilding components such as forks, shocks, hubs, suspension linkages, derailleurs, etc. - Measures 15 x 24.5-inches (38cm x 62cm) - Interlocking edges allow multiple mats to be joined together - Tear/abrasion/shock-resistant TPR construction

Built to withstand the punishment of travel and constant use and molded from impact resistant polypropylene, the BX-3 features pallets with 70% more surface area than the BX-2.2. Easily transportable with the integrated wheels and extendable handle, this case was designed with the help of some of the world's best mechanics for optimal form, function and longevity. - Smooth rolling integrated wheels - Extendable handle - Dust and water resistant - Air pressure compensation valve - Custom designed tool-holding pallets with loops and pockets - Gas assisted lid struts for easy opening - Dual-sided upper and mid level folding pallet wings - Front tool pallet that stores safely inside during transport - Nominal dimensions: 23.4" x 17.3" x 9.3" (59.5 cm x 44 cm x 23.5 cm), 21.6 lbs. (9.8 kg)

The DC-2 is a vernier caliper for accurately measuring seat posts, head tubes, bearings, spoke diameters, and other components, featuring a large LCD screen for accuracy and ease of use. The tool’s ability to measure in metric and inches in external, internal, depth, and stepped dimensions make it an indispensable shop tool. - Range: 150 mm | 6" - Resolution: 0.01 mm | 0.0005" - Accuracy: +/- 0.02 mm | 0.001" - Repeatability: +/- 0.01 mm | 0.0005" - Measures external, internal, depth, and stepped dimensions - Uses LR44 batteries

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. The durable composite body features our iconic three-way wrench shape and prevents scratching of expensive components. Angled ends allow for safe installation and removal of Shimano Di2 E-tube EW-SD300; wires in tight spaces. Universal coin cell tool helps remove and install battery covers on SRAM AXS and other electronic accessories. - Compatible with Shimano Di2 E-tube, EW-SD300 wires (nominally 3 mm OD connector) - Not compatible with Shimano Di2 E-Tube EW-SD50 wires (nominally 5 mm OD connector) — use the Park Tool EWS-1

Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.